|
Health and
Safety Information
Things you
should know
• The rotary unions
illustrated within this catalogue should not present any hazard when
correctly fitted, installed, maintained and operated within the normal
conditions and parameters as outlined by the specifications provided. To
ensure satisfactory performance, all unions are run-in and leakage tested
before shipping. Please note that dismantling units will invalidate the
warranty.
• It is essential to use
the correct hand of rotary connection thread to ensure that
the union with not unscrew (see the installation instructions for
additional information). If a shaft reverses rotation while under
operating conditions then the union must be locked or, preferably, a
flanged connection should be used.
• Prior to any
maintenance, repair or removal, be sure to depressurize and drain
the system to avoid injury.
• Do not exceed or
combine maximums as outlined under the maximum operating
conditions for each rotary union model. When in doubt, please contact us
for additional information to ensure safe, satisfactory performance.
• At some point, the
seals in a rotary union will leak. Regular daily inspection is
recommended. Ensure that any leakages are not hazardous to personnel or
equipment and be sure to fit protective guards when appropriate. Repair
any leaks immediately to avoid the possibility of extensive damage. If
leakages are not attended to promptly, bearing seizure is possible which
can lead to flexible hose failure and potentially massive leakage. As a
preventative measure for certain hazardous applications, an excess torque
detector can be fitted to stop a machine before major damage occurs.
• With oil systems,
minor leakages are normal and will occur resulting from the
natural characteristics of oil which prevents the seal faces from
contacting fully.
• Also note: for all
rotary union models currently manufactured, non-asbestos
gaskets have replaced all of the compressed asbestos fibre material that
was used previously. Existing units may still contain asbestos and should
be handled and disposed with care according to asbestos product safety
regulations.
Please contact us if you have
any questions or concerns about the use of Filton® products.
Safety first!
Back to Filton® Home Page
|
